Bộ điều khiển động cơ không chổi than MBEG MINAS-BL GV Series Panasonic

Mã Sản Phẩm: : MBEG-GV
Tên Sản Phẩm: : Bộ điều khiển động cơ không chổi than MBEG MINAS-BL GV Series Panasonic
Danh Mục: : Servo Motor
Thương Hiệu: : Bộ Điều Khiển-Động Cơ Panasonic
Giá: : Liên Hệ

Chi Tiết Sản Phẩm

Bộ điều khiển động cơ không chổi than MBEG MINAS-BL GV Series Panasonic

Loại sản phẩm: Bộ điều khiển tốc độ động cơ không chổi than MBEG MINAS-BL GV Series Panasonic
Mã sản phẩm:
- MBEG5A1BCVC, MBEG5A1BDVC, MBEG5A5BCVC, MBEG5A5BDVC: 50W
- MBEG9A1BCVC, MBEG9A1BDVC, MBEG9A5BCVC, MBEG9A5BDVC: 90W
- MBEG1E1BCVC, MBEG1E1BDVC, MBEG1E5BCVC, MBEG1E5BDVC: 130W
Công suất: 50W ~130W
Bộ điều khiển tốc độ Động cơ không chổi than kết hợp động cơ MBMU: MINAS-BL GV Series Panasonic MBMU
Download

Thông số kỹ thuật:

Item		Specifications
Amplifier model No.		MBEG5A1BCV	MBEG5A5BCV		MBEG9A1BCV	MBEG9A5BCV		MBEG1E1BCV	MBEG1E5BCV
Applicable Motor *1		MBMU5AZA〇			MBMU9A1A〇	MBMU9A2A〇		MBMU1E1A〇	MBMU1E2A〇
Motor rated output (W)		50			90			130
Input power supply voltage (V)		Single phase 100 to 120	Single phase	3-phase	Single phase 100 to 120	Single phase	3-phase	Single phase 100 to 120	Single	3-phase
			200 to 240			200 to 240			200 to 240
Frequency (Hz)		50/60
Rated input current (A)		1.5	0.7	0.35	2.2	1.1	0.5	2.8	1.5	0.7
Voltage tolerance		±10 ％
Control method		Speed control by CS signal, PWM sine wave driving system
Ambient temperature		0 ℃ to ＋50 ℃ (free from freezing) * Ambient temperature is measured at a distance of 5 cm from the amplifier.
Ambient humidity		20 % to 85 % RH (free from condensation)
Location		Indoor (No corrosive gas, A place without garbage, and dust)
Altitude		Lower than 1000 m
Vibration		5.9 m/s2 or less (10 Hz to 60 Hz)
Protection structure/ Cooling system		Equivalent to IP20/ Self cooling
Storage temperature		Normal temperature * Temperature which is acceptable for a short time, such as during transportation is –20 ℃ to 60 ℃ (free from freezing)
Storage humidity		Normal humidity
Rated rotation speed		3000 r/min
Speed control range		30 r/min to 4000 r/min (Speed ratio 1:133)
Speed fluctuation factor	With load	±0.5 % or below (at 0 to Rated torque, Rated rotation speed)
	With voltage	±0.5 % or below (at supply voltage ±10 %, rated rotation speed)
	With temperature	±0.5 % or below (at 0 °C to 50 °C, rated rotation speed)
Acceleration/ Deceleration time		0.01 sec to 300 sec (time for changing 1000 r/min)*2
Stopping procedure		Slowdown stop/ Free-run stop*2
Speed setting		0 r/min to 4000 r/min (analogue voltage (0 V to 5 V), console A), 0 r/min to 4000 r/min (Setting selection by parameter on Digital key pad)
Speed setting resolution		Analog: approx. 1/200 of upper speed limit Digital: 1 r/min
Speed setting precision (at 20 °C)		Analogue: ±3 % or below of upper speed limit (±90 r/min or below at upper speed limit 3000 r/min) [Digital: 1 % or below of upper speed limit ]
Operation mode		8 speed
Signal input		5 inputs*2 (run/ stop, CW run/ CCW run, multi function 3bit)
Signal output		2 outputs (Open collector)*2 (Trip output etc)
Communication function	RS485	Max 31 units. Setting of parameter, monitoring of control condition. Communication speed: Choose from 2400 bps/ 4800 bps/ 9600 bps
	RS232	Setting of parameter and monitoring of control condition are enabled with commercial PC.*3
Digital key pad		Setting of parameter, monitoring of control condition.*4
Protective function		Warning : Undervoltage2, Overload warning, setting change warning Protect : Undervoltage2, Overload, Overcurrent, Overvoltage, Overheat, Overspeed, Sensor error, RS485 communication error, External forced trip error, User parameter error, CPU error
Regenerating brake		Regenerative braking resistor can be externally connected.*5 Instantaneous braking torque 200 %, Continuous regenerative ability of external regenerative resistor: 10 W (Regenerative operation with which motor shaft is rotated by load, e.g. load lowering operation, should not be continued.)
Protection level		Protection level: torque command 115 (inverse time characteristics)
Amplifier mass (kg)		0.37