Chi Tiết Sản Phẩm
JetCon3401G V2 Gigabit Media Converter
Model:JetCon 3401G V2
Specification:
Industrial Gigabit Ethernet Media Converter
JetCon3401G V2 Gigabit Media Converter
Converts 10/100/1000TX to 100/1000 Fiber
Flexible SFP Fiber transceiver design
Fault Alert for power
Two way Link loss forwarding
Power redundancy with wide range input
Slim Case with IP-31 grade protection
Wide range operating temperature
Power Redundancy with 10~60V wide voltage input
Railway Certification EN50121-4 Compliance
Technology | |
Standard | IEEE802.3 10Base-T |
IEEE802.3u 100Base-TX | |
IEEE802.3at 1000Base-T | |
IEEE802.3z Gigabit Ethernet Fiber | |
IEEE802.3x flow control and back-pressure. | |
IEEE802.1p Class of Service | |
IEEE802.1Q Quality of Service | |
Performance | |
Forwarding Technology | Store and Forward technology with 64 ~1536 bytes packet forwarding ability |
System Throughput | 1.49Mpps |
Packet buffer | 2.75Mbits |
Link Loss Forwarding | Two-way loss-signature auto forwarding, configured by DIP switch |
Event Alarm | Configurable relay alarm output for port or power events |
Interface | |
Number of Ports | 1 x 10/100/1000 Base-TX with Auto MDI/ MDI-X function, Auto-Negotiation |
1 x SFP socket with hot-swappable function for Gigabit Ethernet SFP Transceiver | |
Connector | 10/100/1000 Base-TX: RJ-45 |
SFP socket: support 3.3V Gigabit Ethernet 1.25Gbps Fiber Transceiver. | |
Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output | |
Cables | RJ-45 Connector: 4 pairs of Cat-5 UTP/STP cable with EIA/TIA 568B type conductor arrangement for 1000Base-T. Maximum link distance is 100meters |
Configuration DIP Switch | DIP 1: Port Event Alarm Enable/Disable |
DIP 2: Power Event Alarm Enable/Disable | |
DIP 3: Link Loss Forwarding Enable/Disable | |
Core | RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters. |
SC connector: supports multi-mode or single-mode optical fiber | |
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM | |
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM | |
Diagnostic LED | System: Power (Green) x2 ,Link Loss Forwarding (Red) x1, Alarm (Red) x1 |
RJ-45 port: Speed (Green): On (1000Mbps Link), Blinking (100Mbps Link), Off (10Mbps Link or disconnect). | |
Link/Activity (Green): On (Link), Blinking (Activity) Full Duplex/Collision (Yellow): On (link at full duplex mode), Blinking ( Collision) | |
SFP port: Link/Activity (Green): On (Link), Blinking (Activity) Full Duplex/Collision (Yellow):On (link at full duplex mode), Blinking ( Collision) | |
Power Requirements | |
System Power | DC 24V (12~48V) with polarity reverse correction and over current protection |
Power Consumption | 8 Watts @ DC 24V(Maximum) |
Mechanical | |
Installation | DIN Rail or Wall Mount |
Case | Aluminum alloy metal case with grade 31 of ingress protection |
Dimensions | 120mm(H) x 55mm (W) x108 mm (D) ( with DIN rail clip) |
Environmental | |
Operating Temperature | -25 to 70°C |
Operating Humidity | 0% to 95% (Non-condensing) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Storage Humidity | 0%~ 95% (non-condensing) |
Regulatory Approvals | |
Hi-Pot | 1.5KV on port to port and port to power |
EMI | FCC Class A, EN55022 |
EMC | EN61000-4-2, EN61000-4-3, EN61000-4-4 , EN61000-4-5, EN61000-4-6, EN61000-4-8, EN610004-11 |
Safety | CE/EN60950 |
Shock | IEC 60068-2-27 |
Free Fall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Sản Phẩm Liên quan
Công Ty TNHH DACO - Nhà Cung Cấp Giải pháp Quản Lý Sản Xuất, Thiết Bị Tự Động Hóa Và Dịch Vụ Kỹ Thuật Công Nghiệp
Địa chỉ: Số 146, Đường Cầu Bươu, Xã Tân Triều, Huyện Thanh Trì, Thành Phố Hà Nội
Hotline: 0904 675 995
Email: kinhdoanh@dacovn.com
Website: www.peppermillapartments.com