HG-KN13J Động cơ Servo Motor Mitsubishi 0.1 KW Không Phanh

Mã Sản Phẩm: : HG-KN13J
Tên Sản Phẩm: : HG-KN13J Động cơ Servo Motor Mitsubishi 0.1 KW Không Phanh
Danh Mục: : Servo Motor
Thương Hiệu: : Servo Motor HG-KN
Giá: : Liên Hệ

Chi Tiết Sản Phẩm

HG-KN13J Động cơ Servo Motor Mitsubishi 0.1 KW Không Phanh

Công suất: 100 W
Tốc độ: 3000 r/min
Tốc độ MAX: 5000 r/min
Độ phân giải Encoder: 17 Bit (131.072 xung/vòng)
Phanh: Không
Phần mềm cấu hình: Mr Configurator 2-SW1DNC-MRC2-E
- Cáp Encoder kết nối Bộ điều khiển MR-JE với động cơ Servo Motor: Cáp Encoder MR-JE
- Cáp Nguồn kết nối Bộ điều khiển MR-JE với động cơ Servo Motor: Cáp nguồn MR-JE
- Cáp phanh kết nối Bộ điều khiển MR-JE với động cơ Servo Motor: Cáp phanh MR-JE

Thông số kỹ thuật:

Servo motor model HG-KN		13(B)J	23(B)J	43(B)J	73(B)J
Compatible servo amplifier model		Refer to "Combinations of Servo Motor and Servo Amplifier" on p. 2-1 in this catalog.
Power supply capacity *1 [kVA]		0.3	0.5	0.9	1.3
Continuous running duty	Rated output [W]	100	200	400	750
	Rated torque (Note 3) [N•m]	0.32	0.64	1.3	2.4
Maximum torque [N•m]		0.95	1.9	3.8	7.2
Rated speed [r/min]		3000
Maximum speed [r/min]		5000
Permissible instantaneous speed [r/min]		5750
Power rate at continuous rated torque	Standard [kW/s]	12.9	18	43.2	44.5
	With electromagnetic brake [kW/s]	12.0	16.4	40.8	41.0
Rated current [A]		0.8	1.3	2.6	4.8
Maximum current [A]		2.4	3.9	7.8	14
Regenerative braking frequency 2, 3 [times/min]		(Note 4)	(Note 5)	276	159
Moment of inertia J	Standard [× 10-4 kg•m2]	0.0783	0.225	0.375	1.28
	With electromagnetic -4 2 brake [× 10 kg•m ]	0.0843	0.247	0.397	1.39
Recommended load to motor inertia ratio (Note 1)		15 times or less
Speed/position detector	Combination with MR-JE-B	Absolute/incremental 17-bit encoder (resolution: 131072 pulses/rev)
	Combination with MR-JE-A	Incremental 17-bit encoder (resolution: 131072 pulses/rev)
Oil seal		Installed. Without oil seal is also available.			Installed
Insulation class		130 (B)
Structure		Totally enclosed, natural cooling (IP rating: IP65) (Note 2)
Environment *4	Ambient temperature	Operation: 0 °C to 40 °C (non-freezing), storage: -15 °C to 70 °C (non-freezing)
	Ambient humidity	Operation: 80 %RH maximum (non-condensing), storage: 90 %RH maximum (non-condensing)
	Ambience	Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust
	Altitude	1000 m or less above sea level
	Vibration resistance *5	X: 49 m/s2 Y: 49 m/s2
Vibration rank		V10 *7
Compliance to standards		Refer to "Conformity with global standards and regulations" on p. 17 in this catalog.
Permissible load for the shaft *6	L [mm]	25	30	30	40
	Radial [N]	88	245	245	392
	Thrust [N]	59	98	98	147
Mass	Standard [kg]	0.6	0.98	1.5	3
	With electromagnetic brake [kg]	0.8	1.4	1.9	4.0

Kết hợp động cơ Servo Motor:

Servo amplifier	Servo motor
Servo amplifier	HF-KN series	HF-SN series
MR-JE-10A	HF-KN13J	-
MR-JE-20A	HF-KN23J	-
MR-JE-40A	HF-KN43J	-
MR-JE-70A	HF-KN73J	HF-SN52J
MR-JE-100A	-	HF-SN102J
MR-JE-200A	-	HF-SN152J, HF-SN202J
MR-JE-300A	-	HF-SN302J

Servo amplifier	Servo motor
Servo amplifier	HG-KN series	HG-SN series
MR-JE-10B/MR-JE-10A	HG-KN13J	-
MR-JE-20B/MR-JE-20A	HG-KN23J	-
MR-JE-40B/MR-JE-40A	HG-KN43J	-
MR-JE-70B/MR-JE-70A	HG-KN73J	HG-SN52J
MR-JE-100B/MR-JE-100A	-	HG-SN102J
MR-JE-200B/MR-JE-200A	-	HG-SN152J, HG-SN202J
MR-JE-300B/MR-JE-300A	-	HG-SN302J